SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS, 2U Rack-Tower, Pre-Installed WEBCARDLX Network Interface, LCD Display, USB, DB9 Serial

By Market Place | February 13, 2023 |

$2,805.00

  • 3kVA / 3000VA / 2250W line interactive 2U rack/tower UPS, Sine Wave
  • Extended runtime options up to 1600W, Interactive LCD interface, 4 post mounting kit
  • USB, RS232, EPO and pre-installed WEBCARDLX Network Interface
  • 120V NEMA L5-30P input and 8 NEMA 5-15/20R & 1 L5-30R outlets
  • To enable the Auto Probe feature, this product requires LX firmware update 15.5.2 or later to be installed

34 in stock

SKU: SY3461633 Categories: ,

Description

  • Tripp Lite SMART3000RM2UN line interactive 2U rack/tower UPS with 3000VA / 3kVA capacity (1600W maximum load with external battery packs)
  • Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltage from 83 to 145V.
  • NEMA L5-30P input plug; 8 NEMA 5-15/20R and 1 L5-30R output receptacles, Two independently switchable output load banks
  • Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltage.
  • High 98% efficiency rating in line-power mode offers reduced power consumption and BTU emissions.
  • Internal batteries offer 10 minutes at 50% load (1125W) and 3.5 minutes at 100% load (2250W)
  • Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs (max output de-rates to 1600 watts with external batteries)
  • External battery configurations require the use of Tripp Lite’s External Battery Configuration Software (see manual)
  • Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment.
  • Intelligent battery management system extends battery life.
  • Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information.
  • LCD interface also supports a number of advanced user setup and operating preferences.
  • Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wall mount installation; Optional 2-9USTAND enables tower placement.
  • Network interfaces support communications via built-in USB, DB9 serial / contact-closure and pre-installed WEBCARDLX network management card.
  • WEBCARDLX interface allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, or Command Line.
  • Reduce service calls with Auto Probe Autonomous Device Management. The Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
  • Optional E2 sensors enable site monitoring of temperature, humidity and contact-closure status.
  • HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software, available via FREE download from www.tripplite.com/poweralert
  • Built-in Emergency Power Off (EPO) interface with cable

Additional information

Weight 73.80 lbs
Dimensions 25.50 × 22.50 × 9.50 in
Brand

Lite, Tripp

UPC

037332177902

MPN

SMART3000RM2UN

Technical Specifications

  • OVERVIEW
  • UPC Code: 037332177902
  • UPS Type: Line-InteractiveINPUT
  • Rated input current (Maximum Load): 24A
  • Nominal Input Voltage(s) Supported: 120V AC
  • UPS Input Connection Type: L5-30P
  • UPS Input Cord Length (ft.): 10
  • Recommended Electrical Service: 30A 120V
  • Input Phase: Single-PhaseOUTPUT
  • Output Capacity (VA): 3000
  • Output Capacity (kVA): 3
  • Output Capacity (Watts): 2250
  • Output Capacity (kW): 2.25
  • Power Factor: 0.75
  • Nominal Voltage Details: 120v nominal output in battery mode
  • Frequency Compatibility: 60 Hz
  • Output Voltage Regulation (Line Mode): -14%, +6%
  • Output Voltage Regulation (Battery Mode): +/- 5%
  • Load Management Receptacles: Two switchable single-outlet load banks
  • Output Circuit Breakers: Two 20A output breakers protect 4 5-15/20R outlets each.
  • Output AC Waveform (AC Mode): Pure Sine wave
  • Output AC Waveform (Battery Mode): Pure Sine wave
  • Nominal Output Voltage(s) Supported: 110V; 115V; 120V.
  • Output Receptacles: (8) 5-15/20R; (1) L5-30R
  • Individually Controllable Load Banks: YesBATTERY
  • Battery Type: Valve Regulated Lead Acid (VRLA)
  • Runtime Full Load (min.): 3.5 min. (2250W)
  • Runtime Half Load (min.): 10 min. (1125W)
  • Expandable Runtime: Yes
  • Expandable Runtime Description: Output with external battery pack configurations is limited to 1600 watts maximum.
  • External Battery Pack Compatibility: BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)
  • DC System Voltage (VDC): 48
  • Battery Recharge Rate (Included Batteries): Less than 4.5 hours from 10% to 90%
  • Battery Access: Front panel battery access door
  • Internal UPS Replacement Battery Cartridge: RBC94-2U
  • Battery Replacement Description: Hot-swappable, user replaceable batteriesVOLTAGE REGULATION
  • Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145.
  • Overvoltage Correction Input: voltages between 127 and 145 are reduced by 12%
  • Undervoltage Correction Input: voltages between 108 and 96 are boosted by 12%
  • Severe Undervoltage Correction Input: voltages between 83 and 95 are boosted by 24%USER INTERFACE, ALERTS & CONTROLS
  • Front Panel LCD Display: Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
  • Switches: 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset
  • Alarm Cancel Operation: Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available.
  • Audible Alarm Audible: alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions.
  • LED Indicators: Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec).SURGE / NOISE SUPPRESSION
  • UPS AC Suppression Joule Rating 570
  • UPS AC Suppression Response Time: Instantaneous
  • EMI / RFI AC Noise Suppression: Yes
Twisted VoIP