Yealink WH62 Portable

2 min read

Getting Started #

Package Contents #

TIP:

The package consists of one WHM621 or WHD622 headset and one WDD60. Some third-party accessories may be incompatible with the headset, so we strongly recommend that you use Yealink accessories only.

Overview #

No. Item Action & Function
1 Answer or end a call Press Call Control button
1 Reject a call Double-press Call Control button
1 Hold or resume a call Press and hold Call Control button for 2s
2/3 Volume up or down Press Volume Up/Down button
4 Mute or unmute your microphone Press Mute button or move the microphone boom-arm up/down

Power ON/OFF #

Power on/off Action LED Indicator Voice Prompt
Power on Press and hold Call Control for 3s Solid red for 3s Power on
Power off Press and hold Call Control for 3s Flash red for 3 times Power off

NOTE:

The headset will automatically power off after disconnecting from the WDD60 for more than 10 minutes to save power.

LED Indicator Status #

Headset LED Indicator #

The Busylight synchronizes with the headset’s LED indicator status.

LED Headset Status
Battery level
Off Power off/idle
Flash red slowly Battery < 5% (low battery)
Charge
Flash red Battery < 20%
Flash green Battery ≥ 20% and <100%
Solid green Battery 100% (full)
Call
Flash red fast Ringing
Solid red On the call/In the mute
Flash red twice Hold
Pair
Flash blue Pairing mode
Solid blue for 3s Pair successfully
Flash orange slowly Out of range
Update
Flash red and green alternatively Firmware update

WDD60 LED Indicator (DECT Dongle) #

LED WDD60 Status
Connect to PC
Solid blue for 1s and off Unpaired headset
Solid blue for 1s and glow blue Paired headset
Pair
Flash red and blue Pairing mode
Solid blue Pair successfully
Call
Fast flashing purple Ringing
Solid purple On the call
Solid red Mute
Solid orange for 5s and off Paired headset power off / out of range
Go to Top